smart controller

MyHiGrow Grow Tent Environment Grow Light Smart Controller

MyHiGrow 24 Inch Hanging Herb Drying Rack Six Tiers
MyHiGrow Wall Mounted Fan 16 Inch

MyHiGrow Grow Tent Environment Grow Light Smart Controller

$199.00

In stock
Product Points : 10Points

$199.00

Input: DC12V
Size: 160x98x33mm

  • When the LED grow light can switch the spectrum, this controller can achieve spectrum switching.
  • Scene mode setting, Sunrise and sunset settings, PPFD settings.
  • Reduce power or turn off lights at high temperatures.
  • Four channels control.
  • Time-division power or switch control.
  • Function expansion: PPFD test, smart socket, and carbon dioxide test.
Availability: In stock
Add to wishlist

Description

How To Use

STEP 1: Connect the control to the power supply. Entering the main interface will display the control channels of L1-L4.

STEP 2: Click L1 to enter the main channel setting interface.

STEP 3: Click ON/OFF on the screen to turn on and off the LED.

STEP 4: Change the spectrum by clicking the spectrum map on the right side.

STEP 5: Enter the percentage in the box under DIMMING LEVEL to set the power.

STEP 6: Click to enter the time control interface.

STEP 7: Three time settings can be filled in. Fill in the time period you need in 24H and the corresponding light power respectively, and tick the box before the operating time.
If only two settings are filled in, then the lights will not turn on for the rest of the 24H period.

STEP 8: Go back to L1 settings and click to enter sunrise and sunset settings.

STEP 9: After the parameters are set, click Activate to start. Generally the starting power is filled in 12%.

STEP 10: Click to set temperature control.

STEP 11: Auto Dim-Target means the power will be
reduced to 50% at that temperature.
Down-Target means the light will be automatically turned off at that temperature.
After the parameters are set, click Activate to start.

STEP 12: Click to enter the PPFD interface.

STEP 13: After the parameters are set, click Activate to start.
The light will be adjusted to the corresponding
power to reach the entered PPFD value.

NOTE: If the maximum power of the light does not reach the set value of PPFD, the
controller can only adjust the the power of the light maximum.